SDI Cable 3 Meters

Description

While you are probably very familiar with video connections based on HDMI, SDI is the professional connection, where an SDI cable 3 meters is necessary. All consumer-oriented products are usually equipped with one or more HDMI connections. This includes TV screens, projectors, or laptops. A fine connection for everyday devices, but there are disadvantages for professional use. On professional equipment, such as cameras, video mixers, and recorders, you will find SDI connections. To use these, you need an SDI cable 3 meters.

Why is SDI used more often at professional events than HDMI?

An SDI cable uses a single core in the cable. Compared to an HDMI cable with as many as 19 cores, the chance of interference with SDI is thus much smaller. Additionally, our SDI cables are equipped with a braided jacket instead of a foil jacket, as with HDMI cables. This allows you to roll up and unroll the SDI cable 3 meters repeatedly without causing damage to the cable. Very suitable for events, therefore.

Furthermore, SDI cables use BNC connectors on both ends. This allows you to easily connect the cable to the equipment’s ports. These BNC plugs are ideal for professional applications. After attaching the plug, you need to turn it a quarter turn, which locks it in place. Accidental disconnection is no longer possible, which again leads to fewer disruptions.

What are the characteristics of the SDI Cable 3 Meters?

This SDI cable 3 meters, with its short length, is ideal for use in a control room. Here, all kinds of small devices are usually connected with SDI. With this cable, you have just enough length to connect everything together. The base of the cable is formed by the well-known Belden 1694F cable, and on both ends, you’ll find a Neutrik BNC connector. Of course, this cable has a typical impedance of 75 Ohms. If you’re looking for a longer cable for your application, check out our versions of 5, 10, 20, or even 50 meters.