Pipe Drape Baseplate Pin – 10 cm

Description

Want to rent a Pipe drape baseplate pin 10cm? Setting up a pipe drape system is not possible without baseplates. These are necessary to provide stability to the upright. To place the upright on the baseplate, you need a pin. The pin ensures the connection between the upright and the baseplate of the pipe drape system.

What can I use the Pipe Drape Baseplate Pin 10cm for?

The pipe drape pins come in different lengths. The 10-centimeter long pin provides sufficient stability to the 120 cm upright. This is the most commonly used upright for screening off the control or FOH area. The pipe drape baseplate pin 10cm transfers the forces from the upright to the baseplate, which ensures the stability of the system. For use in combination with pipe drape curtains, we recommend the pin with a length of 20 cm. When using a light effect or spotlight on an upright, we recommend using the 40 cm version.

How do I attach the pin to the baseplate?

The pipe drape baseplate pin 10cm comes with an Allen bolt. You place this in the desired hole of the baseplate. Then you screw the bolt into the pin on the flat side of the baseplate. The choice of hole depends on the placement of the upright in the space. You don’t need an Allen key for this. When the pin is hand-tightened, this is sufficient. This also facilitates the dismantling of the pipe drape system.