XLR cable 5-pin 10 meters

Description

Want to rent an XLR cable 5-pin 10 meters? Do you want to control the lighting at your event in a professional manner? Then it’s likely necessary to use DMX. A protocol that has been applied for years but is still relevant. If your lights have two 5-pin connections on the back, they are probably suitable to be controlled via a lighting console with DMX. This makes it possible to control the lighting as desired and tailor it to the event. To send the DMX signal from the lighting console to the fixtures, you need the right cables. Our 5-pin XLR cables offer the solution to send the signal to your lights.

What can I use the XLR cable 5-pin 10 meters for?

To transport the DMX signal from the lighting console to the lights, we use cables. Most professional fixtures are equipped with 5-pin DMX inputs and outputs, but there are also lights with 3-pin connections. Therefore, it’s essential to always check carefully which type of cable you need. When setting up a DMX line, you usually start at the lighting console, where you connect the XLR cable to the DMX output of the controller and place the other end in the first light.

Often, a longer cable is used for this, so that the signal can be transmitted over greater distances. The XLR cable 5-pin 10 meters is excellent for this purpose. Between the fixtures themselves, shorter cables of, for example, 3 meters usually come in handy. This is done through the daisy-chain principle: via the DMX input and output on the fixture, you can easily pass the control signal from one light to another, ensuring simple and efficient signal transmission. A well-laid DMX line ensures that your lighting runs perfectly in sync and the desired effects can be achieved.

What are the specifications of the XLR cable 5-pin 10 meters?

This XLR cable 5-pin 10 meters has a male connector on one end and a female connector on the other end. This allows you to connect multiple cables together to achieve the desired length. We use Neutrik connectors, known for their sturdiness and reliability, making them perfectly suitable for rental and touring applications. The cable itself is of the type Tasker C862, a strong 5-pin cable with a resistance of 110 ohms. This resistance helps prevent interference in the DMX line by counteracting reflections. We also offer this XLR cable 5-pin 10 meters in a 3 meter, 5 meter, and 20 meter version.