Confetti Set 3

Description

Are you organizing a building opening, unveiling a specific object or painting, or want to start your event spectacularly? With this Confetti Set 3, you’ll give it extra impact. This set is well-suited for smaller events. Additionally, this set ensures a booming and colorful start to your event or unveiling, creating an unforgettable moment.

What confetti shapes are possible?

The Confetti Set 3 can be configured in various ways. You have a choice in the shape of the confetti to be shot. You can choose from the usual snippets as you often see at various events. The snippets float slowly downwards and provide a long-lasting colorful effect. The confetti is shot up to a maximum of 12 meters far/high by the shooters. Additionally, you have the choice of serpentine confetti. This is usually called streamers.

That’s because these are long strands that are shot into the air. This gives a grand effect but will be down faster due to the longer shape. The streamers are shot up to 20 meters far. On this page, you can easily indicate your desired shape.

What colors are available with Confetti Set 3?

The confetti set comes standard with multicolor confetti. This includes all colors mixed in the tube from which the confetti is shot. Do you need a specific color for your event? In the color choice on this page, you have a selection of many different colors. Do you need a specific mix of colors? Then you can also choose this and indicate in the comments which color combination is desired.

What does the confetti set consist of?

Confetti Set 3 consists of six Magic FX shooting devices with a baseplate to attach the devices. Each cannon has its own confetti tube. That’s six confetti tubes in your desired color or shape. This is enough for one shooting moment. Want to shoot confetti or streamers into the air more than once? Then make the choice for more shooting moments in the product configuration. Additionally, the set comes with a control box with a key. You connect the shooting equipment to this box. This box also ensures that the confetti doesn’t go off unintentionally. Of course, everything is supplied with the necessary cabling.

How do I use Confetti Set 3?

The confetti can be shot with the supplied control box. This is equipped with a key to ensure that the confetti doesn’t go off at an unwanted moment. This way, you maintain control over the shooting moment. On this box, there’s a ‘Fire’ button. When the key is set to ‘On’, the ‘Fire’ button will light up red. When this button is pressed, the confetti will be shot. Next to this button, you will also find a switch.

However, you won’t need this when directly connecting to the shooting devices. Want to let others determine the shooting moment? Then you can also use our white launch pole with red button. Want to know how to easily connect the set? We’ll explain that for you below.

How do I connect the confetti set?

Earlier, you read that the set comes with the necessary power cables. However, the shooting devices are not suitable for direct connection to a power outlet. The use of the control box or launch button is always necessary. These interrupt the continuous power supply to the shooting devices. This prevents the shooting equipment from burning out. Unfortunately, these cannot be controlled wirelessly.

How do I connect the set with the control box?

1. First, we connect the included power cable (PowerCON TRUE1) to the Effectivator 1 to power it. The black plug of the powerCON TRUE1 cable can only be connected to one place on the controller. When connecting the connector to the device, gently turn it to the right until you hear a click.

2. On the back of the controller, you will find a black flap. Behind this is a Schuko outlet. You use this to connect the shooters. You do this by using the supplied power strip to connect to the controller. You use the supplied extension cables to extend the distance between the power strip and the shooters. It doesn’t matter which outlet on the power strip you choose to connect the extension cable to. Unroll the extension cables to the place where you want to place the shooters. You can connect two shooters to the end of the extension cables.

3. Next, you can install the shooters. It is possible to mount two shooters on one baseplate. The outer holes on the baseplate give you enough space for this. By mounting the shooters on the baseplate, you prevent the shooters from falling over while shooting the confetti. Use the supplied bolt and nut to secure the shooters to the baseplate.

4. You use the supplied power cables (PowerCON TRUE1) to connect the shooters to the end of the extension cables. The black connector of the PowerCON TRUE1 cable can only be connected to one place on the shooter. When the connector is in the shooter, carefully turn it to the right until you hear a click.

5. Is the entire system connected? Then it’s time to test. Of course, you don’t want the confetti to be fired prematurely. Therefore, you test without tubes. First, switch on the controller. You turn it on with the on/off switch on the back of the controller. A green control LED on top of the controller will now light up. Now you need to insert the supplied key into the controller and turn it. The control LED will now turn red.

Note: the controller is now active! Since the tubes are NOT yet connected, it is now safe to press ‘fire’. A white LED will light up on the shooters when you press this button. Check this with multiple people, as the LED goes out again when you release the ‘fire’ button. If everything works, you can turn the key back and remove it from the controller.

6. Now push the tubes into the shooters. The internal clamps of the shooters ensure that they are automatically secured. You connect the asymmetrical connector on the tube to the shooter. Due to its shape, this can only be done in one way.

7. You can use the system again as soon as you insert the key into the controller and turn it. Now it’s waiting for the right moment to fire the confetti. You use the ‘fire’ button for this.

How do I connect the set with the launch button?

1. First, we connect the supplied power cable (PowerCON TRUE1) to the launch pole to power it. The black plug of the PowerCON TRUE1 cable can only be connected to one place on the pole. When you connect the connector to the device, carefully turn it to the right until you hear a click.

2. Next to the connection for connecting the power cable to the launch pole, you will find an outgoing power connection. You can connect the supplied power cable with 2-way power strip to this. Again, it is only possible to connect the power cable in one way. Once the connector is in the pole, carefully turn it to the right until you hear a click. Connect the supplied 4-way power strip to the 2-way power strip. This way you have more outputs available to go to the shooters.

3. Now use the supplied extension cables to increase the distance between the 4-way power strip and the shooters. The choice of output on the power strip is not relevant here. Lay out the extension cables to the location where you want to install the shooters. At the end of each extension cable, you connect two shooters.

4. Next, you can install the shooters. It is possible to mount two shooters on one baseplate. The outer holes on the baseplate give you enough space for this. By mounting the shooters on the baseplate, you prevent the shooters from falling over while shooting the confetti. Use the supplied bolt and nut to secure the shooters to the baseplate.

5. You use the supplied power cables (PowerCON TRUE1) to connect the shooters to the end of the extension cables. The black connector of the PowerCON TRUE1 cable can only be connected to one place on the shooter. When the connector is in the shooter, carefully turn it to the right until you hear a click.

6. Is the entire system connected? Then it’s time to test. You certainly don’t want the confetti to be fired prematurely. Therefore, testing is done without tubes. By pressing the red button, you can test the system. A white LED will light up on the shooters when you press this button. Check this with multiple people, as the LED turns off when the red button is released. If everything works, it’s time to install the tubes.

7. Now push the tubes into the shooters. The internal clamps of the shooters ensure they are automatically secured. Connect the asymmetric connector on the tube to the shooter. Due to its shape, this can only be done in one way.

8. Then, wait for the right moment and shoot the confetti by pressing the red button.

Is this set environmentally friendly?

You don’t need to worry about the confetti being harmful to the environment. The confetti used in the cannons is biodegradable and therefore does not damage the environment. You can safely use the confetti set outdoors. However, this does not apply to metallic confetti such as gold and silver. These colors are for indoor use only.